非对称场流分离技术在蛋黄浆质低密度脂蛋白粒径表征中的应用

通过自组装的非对称场流分离系统(AF4)与紫外可见光检测器联用分离表征了笼养鸡蛋、柴鸡蛋、鹌鹑蛋和鸭蛋蛋黄浆质中的低密度脂蛋白(LDL)。在近似蛋黄浆质生理条件下,研究了进样量、交叉流流速、膜的类型对AF4蛋黄浆质中LDL分离表征的影响;考察了该方法的精密度。在优化的AF4分析条件下,检测出了笼养鸡蛋、柴鸡蛋、鹌鹑蛋和鸭蛋蛋黄浆质中LDL的水力学粒径分布。LDL的AF4洗脱峰高和峰面积的日内精密度分别为1.3%和1.9%(n=7),日间精密度分别为2.4%和2.3%(n=7)。研究结果表明,该方法可用于分离禽类蛋黄浆质中的LDL,同时能够得到LDL水力学粒径分布。     

重力场流分离系统用于聚苯乙烯颗粒的分离条件优化

重力场流分离是最简单的场流分离(gravitational flow-field fractionation,GrFFF)技术,常用于分离粒径几微米到几十微米的颗粒及生物样品。利用自组装加工的重力场流分离仪器分离3种不同粒径(3、6、20μm)的聚苯乙烯(PS)颗粒。自制了一种混合表面活性剂,并与商品化的表面活性剂FL-70进行了比较。通过均匀设计优化流速、混合表面活性剂中聚乙二醇辛基苯基醚(Triton X-100)的质量分数、载液黏度、停流时间等分离条件,以分离度(Rs)和保留比(R)为评价指标,发现FL-70的分离效能略优于自制的混合表面活性剂,可实现3种PS颗粒的完全分离(Rs1为1.771,Rs2为2.074)。结果表明该系统具有良好的分离性能。     

常压敞开式质谱离子源发展趋势

近年来常压敞开式离子源凭借快速、原位、实时离子化样品等优势,被广泛应用于样品快速筛查、真伪鉴定、质谱成像等领域,已成为当今离子源的研究热点,受到了学术界及仪器制造、化学和生物分析等相关产业界的广泛关注。目前,该类离子源朝着克服基体效应、提高样品表面定位能力及增加离子传输距离等方向发展。本文主要介绍了可以很好解决上述问题并具有代表性的三种常压敞开式离子源:电喷雾萃取离子源(EESI)、介质阻挡放电离子源(DBDI)及空气动力辅助离子源(AFAI),重点涉及原理以及在此基础上所做的设计改进和应用进展。     

Fabrication of Photoelectrochemical Glucose Biosensor in Flow Injection Analysis System Using ZnS/CdS‐Carbon Nanotube Nanocomposite Electrode

In this work, a photoamperometric glucose biosensor based on glucose oxidase (GODx) was developed in flow injection analysis (FIA) system using ZnS‐CdS quantum dot (QD) modified multiwalled carbon nanotube/glassy carbon electrode (ZnS‐CdS/MWCNT/GCE). Cyclic voltammograms of the proposed electrode (GODx/ZnS‐CdS/MWCNT/GCE) showed a pair of well‐defined reversible redox peak attributing that direct electron transfer between the protein and electrode. The current of the reduction peak became more cathodic in the presence of O₂ due to the electrocatalytic activity of the electrode towards the reduction of dissolved O₂, but reduction current shifted to a less negative value upon addition of glucose in the solution. The obtained CV currents were affected by the irradiation of the electrode surface. Thus, the photoelectrochemical biosensing of glucose in the FIA system was studied by monitoring of the changes in the electrocatalyzed reduction peak current of dissolved O₂ at the proposed electrode dependent on glucose concentration. The proposed photoelectrochemical FIA method has a linear response to glucose ranging from of 0.01 to 1.0 mM with detection limit of 3.0 μM under optimized conditions. Photoelectrochemical biosensor was successfully fabricated in FIA system for selective, sensitive and repeatable detection of glucose and has been satisfactorily applied to determination of glucose in real sample.     

QSPR studies on the photoinduced-fluorescence behaviour of pharmaceuticals and pesticides

Fluorimetric analysis is still a growing line of research in the determination of a wide range of organic compounds, including pharmaceuticals and pesticides, which makes necessary the development of new strategies aimed at improving the performance of fluorescence determinations as well as the sensitivity and, especially, the selectivity of the newly developed analytical methods. In this paper are presented applications of a useful and growing tool suitable for fostering and improving research in the analytical field. Experimental screening, molecular connectivity and discriminant analysis are applied to organic compounds to predict their fluorescent behaviour after their photodegradation by UV irradiation in a continuous flow manifold (multicommutation flow assembly). The screening was based on online fluorimetric measurement and comprised pre-selected compounds with different molecular structures (pharmaceuticals and some pesticides with known ‘native’ fluorescent behaviour) to study their changes in fluorescent behaviour after UV irradiation. Theoretical predictions agree with the results from the experimental screening and could be used to develop selective analytical methods, as well as helping to reduce the need for expensive, time-consuming and trial-and-error screening procedures.     

夹心法免疫层析试条的数学模型与仿真研究

基于夹心法免疫层析试条检测原理,结合对流扩散方程和流体动力学方程,建立了夹心法免疫层析试条动态反应过程的数学模型,并通过COMSOL软件对试条动态反应过程进行仿真.分别探究了目标待测物A浓度在0 ～ 20 mol/L,标记物P浓度在1×10-2～1×103 mol/L以及硝酸纤维素膜的孔隙率在0～1范围内变化时,检测线上夹心复合物浓度关于位置和时间的浓度变化情况,并分析了各物质初始浓度以及试条结构对于检测结果和检测时间的影响.结果表明,在一定浓度范围内,目标待测物A以及标记物P浓度的增加将提高试条的定量检测性能,而孔隙率通过影响混合液流速和混合液中各物质反应接触情况来影响检测结果.     

氟苯尼考胶体金免疫层析定量检测方法的建立

建立了定量检测氟苯尼考的胶体金免疫层析方法.对胶体金标记抗体时溶液pH和抗体浓度、金标抗体用量、检测线上抗原浓度以及检测时间进行了优化.采用胶体金试纸条读取仪测定试纸条检测线和质控线的信号强度,以标准品的浓度为横坐标,阳性样本和阴性样本的检测线/质控线的信号比值(Bx/B0)为纵坐标建立标准曲线.结果表明,胶体金免疫层析试纸定量检测氟苯尼考的线性范围为0.1~1.5 ng/mL,检出限为0.08 ng/mL,检测时间为15 min.本方法具有简便、快速和可定量等特点,适于大批量样品的现场筛查.     

Nematodynamics and structures in junctions of cylindrical micropores

ABSTRACT

We explore equilibrium structures and flow-driven deformations of nematic liquid crystals confined to 3D junctions of cylindrical micropores with homeotropic surface anchoring. The topological state of the nematic ordering field in such basic unit of porous networks is controlled by nematic orientation profiles in individual pores, anchoring frustration along the edges of joining pores and coupling to the material flow field. We numerically investigate formation of the flow-aligned configurations in single cylindrical pores and pore junctions. Depending on the arrangement of inlet and outlet flows in the junction, we demonstrate existence of numerous stationary nematic configurations, characterised by specific bulk defects and surface disclinations along joining edges. Observed bulk defects are nonsingular escaped structures, disclinations in the form of loops or disclination lines pinned to the joining edges of the pores. Furthermore, we show examples of defect dynamics during the flow-induced topological transformations.     

[C_2mim][Ala]丙氨酸离子液体水溶液粘滞流动的活化参数

在288.15-328.15 K温度范围内,测量了不同浓度的氨基酸离子液体[C_2mim][Ala]水溶液的密度和粘度,根据J ones-Dole方程得到了较大正值的粘度B系数并且dB/dT0。借助Feakins理论,计算了溶质对溶液粘滞流动活化自由能贡献Δμ_2~(≠0),根据Δμ_2~(≠0)随温度的线性变化,进而得到流动活化熵ΔS_2~(≠0)和活化焓ΔH_2~(≠0);在E yring液体粘度的过渡态理论基础上,提出了预测离子液体[C_2mim][Ala]水溶液粘度的半经验新方法,其预测值与相应的实验值很好的一致。